BMW 3: WiFi hotspot
Concept
Compatible devices with WiFi interface can use the Internet connection of the vehicle via the WiFi hotspot.
General information
Up to 10 devices can be connected to the WiFi hotspot simultaneously.
Functional requirements
- Compatible device, with activated WiFi interface.
- WiFi is activated on the vehicle.
- Internet use is activated for the vehicle.
- Registration and data contract with a service provider where required.
- Standby state is switched on.
Connecting a device to the Internet via the WiFi hotspot
Using the Internet for the first time via the WiFi hotspot requires registration and possibly a data volume purchase from a service provider.
Depending on the country version, data volume can be purchased via the connected mobile device or from the ConnectedDrive Store.
Via iDrive:
1. "COM".
2. "Mobile devices".
3. Move the Controller to the right.
4. "New device".
5. "Internet, apps".
Hotspot name and hotspot code are displayed on the Control Display.
6. Activate Internet usage via WiFi if necessary.
"Open settings".
7. Activate Internet usage.
"Internet connection".
8. Move the Controller to the left.
9. Search for WiFi networks on the mobile device.
Select network name on the device.
10.Enter hotspot code on the device and connect.
The device is displayed in the device list.
Additionally, a QR code will be displayed on the Control Display. Alternatively, this QR code can be used to pair the mobile device with the hotspot.
All devices connected via the hotspot use this data volume.
Deactivating Internet usage via the WiFi hotspot
Internet usage may be deactivated if the data volume is used up, for instance.
Via iDrive:
1. "COM".
2. "Mobile devices".
3. Move the Controller to the right.
4. "Settings".
5. "Internet connection".
6. Select the desired setting.
READ NEXT:
Apple CarPlay preparation
Concept
CarPlay allows certain functions of a compatible
Apple iPhone to be used via Siri voice operation
and iDrive.
Functional requirements
Compatible iPhone.
iPhone 5 or later with iOS 7.1 or la
Screen Mirroring
General information
Screen Mirroring enables mirroring (outputting)
of the smartphone display on the Control Display.
Functional requirements
Compatible smartphone with Screen Mirroring interface.
Managing mobile devices
General information
After one-time pairing, the devices are automatically
recognized and reconnected when
standby state is switched on.
After stored content on the SIM card or the
mobile phone,
SEE MORE:
Sun visor
Glare shield
Fold the sun visor down or up.
Glare shield from the side
Folding out
1. Fold the sun visor down.
2. Unhook it from the holder and swing it to the
side.
3. Move it back to the desired position.
Folding up
Proceed in the reverse order to close the sun visor.
Vanity mirror
A vanity mirr
Introduction
Although the high-voltage battery unit of the G20 PHEV can also be partially
charged by energy
recovery via the electrical machine, the "normal" charging procedure takes place
when the G20 PHEV
is connected to the AC voltage network of the local power supply company. Energy
is taken fro
