BMW 3: Apple CarPlay preparation
Concept
CarPlay allows certain functions of a compatible Apple iPhone to be used via Siri voice operation and iDrive.
Functional requirements
- Compatible iPhone.
iPhone 5 or later with iOS 7.1 or later.
- Corresponding mobile contract.
- Bluetooth, WiFi, and Siri voice operation are activated on the iPhone.
- Booking the ConnectedDrive service: Apple CarPlay preparation.
Switching on Bluetooth and CarPlay
Via iDrive:
1. "COM".
2. "Mobile devices".
3. Move the Controller to the right.
4. "Settings".
5. Select the following setting: "Apple CarPlay".
6. Activate the function.
Pairing the iPhone with CarPlay
Via iDrive:
1. "COM".
2. "Mobile devices".
3. Move the Controller to the right.
4. "New device".
5. "Phone calls and audio".
The vehicle's Bluetooth name is displayed on the Control Display.
6. On the mobile device, search for Bluetooth devices in the vicinity and select the vehicle.
A control number is displayed.
7. Compare the control number displayed on the Control Display with the control number on the display of the mobile device, and confirm that the two match.
8. Select CarPlay: "Confirm note and connect to Apple CarPlay".
The iPhone is connected to the vehicle and displayed in the device list.
Operation
For more information, refer to the Integrated Owner's Manual or the Owner's Manual for Navigation, Entertainment, Communication.
Frequently Asked Questions
All requirements are met and all required steps were completed in the specified order. Despite that, the mobile device does not function as expected.
In this case, the following explanations can help: The iPhone has already been paired with Apple CarPlay. When a new connection is established, CarPlay can no longer be selected.
- Delete the iPhone concerned from the device list.
- On the iPhone, delete the vehicle concerned from the list of stored connections under Bluetooth and under WiFi
- Pair the iPhone as a new device.
If the steps listed have been carried out and the required function is still not available: contact the hotline, a dealer's service center or another qualified service center or repair shop.
READ NEXT:
Screen Mirroring
General information
Screen Mirroring enables mirroring (outputting)
of the smartphone display on the Control Display.
Functional requirements
Compatible smartphone with Screen Mirroring interface.
Managing mobile devices
General information
After one-time pairing, the devices are automatically
recognized and reconnected when
standby state is switched on.
After stored content on the SIM card or the
mobile phone,
SEE MORE:
Overview
Button in the vehicle
Intelligent Safety
Camera
The camera is installed near the interior mirror.
Keep the windshield in front of the interior mirror
clean and clear.
Radar sensors
The radar sensors are located in the front
bumper.
Front side bumper.
Front center bumper.
Keep the radar sensors
Overview
G20 PHEV, system overview of climate control - Installation locations
Combined expansion and shutoff valve at the evaporator
Combined expansion and shutoff valve at the high-voltage battery unit
High-voltage battery unit
Refrigerant lines to high-voltage battery unit
Evaporator, passenge
