BMW 3 Owners & Service Manuals

BMW 3: Fuel gauge

Concept

The current fill level of the fuel tank is displayed.

General information

Vehicle tilt position may cause the display to vary.

Display

An arrow beside the fuel pump symbol shows which side of the vehicle the fuel filler flap is on.

The current range is displayed as numerical value.

Indicator light in the instrument cluster

The yellow indicator light illuminates, once the fuel reserve is reached.

Tachometer

Always avoid engine speeds in the red warning field. In this range, the fuel supply is reduced to protect the engine.

    READ NEXT:

     Shift point indicator

    Concept The shift lights indicate the upshift point at which the best possible acceleration can be achieved. Functional requirement Shift lights are shown when the SPORT or SPORT PLUS driving program

     External temperature

    General information If the indicator drops to +37 ℉/+3 ℃ or lower, a signal sounds. A Check Control message is displayed. There is an increased risk of ice on roads. Safety information Warning

     Service requirements

    Concept The function displays the service requirements and the corresponding maintenance scopes. General information After switching on drive-ready state, the instrument cluster briefly displays avail

    SEE MORE:

     Operating temperature

    The positions of the rotary valve at engine operating temperature are shown by area C of the heat management module circuit diagram. Operating temperature The graphic shows control with the engine at operating temperature. The position of the rotary valve means that the cross-sections of the resp

     Drive-ready state

    Switching on drive-ready state Depress the brake pedal. Press the Start/Stop button. Switching off drive-ready state Steptronic transmission: 1. Engage selector lever position P with the vehicle stopped. 2. Press the Start/Stop button. The engine is switched off. 3. Set the parking brake. Aut

    © 2019-2026 Copyright www.bmw3g20.com