BMW 3: Overview
Buttons on the steering wheel
.png)
With steering and traffic jam
assistant:
Cruise control on/off.
.png)
With steering and traffic jam
assistant:
Select function.
.png)
Without steering and traffic jam
assistant:
Cruise control on/off.
.png)
Store current speed.
Speed Limit Assist: take over suggested speed manually.
.png)
With steering and traffic jam
assistant:
Pause cruise control.
Continue cruise control with the last setting.
.png)
Without steering and traffic jam
assistant:
Continue cruise control with the last
setting.
.png)
Without steering and traffic jam
assistant:
Pause cruise control.
.png)
Increase the distance.
Switch distance control on/off.
.png)
Reduce distance.
Switch distance control on/off.
.png)
Rocker switch:
Set speed.
Radar sensor
.png)
The radar sensor is located in the front bumper.
Always keep radar sensor clean and unobstructed.
Camera
.png)
The camera is installed near the interior mirror.
Keep the windshield in front of the interior mirror clean and clear.
Area of application
The system is best used on well-constructed roads. The system is functional at speeds beginning at approx. 20 mph/30 km/h.
The maximum speed that can be set is limited and, e.g., depends on the vehicle and the vehicle equipment version.
The system can also be activated when stationary.
READ NEXT:
Switching on/off and interrupting
cruise control
With steering and traffic jam
assistant: Assisted Driving
General information
This button is used to switch the
configured
function on and off.
The button can be used to set the
primarily
used funct
Setting the speed
Maintaining and storing the speed
Press the rocker switch up or down once while
the system is interrupted. The system will be activated.
The current speed is maintained and stored as
desired speed.
Displays in the instrument
cluster
General information
Depending on the equipment version, the displays
in the instrument cluster may vary.
Display in the speedometer
Green marking: system is
active,
the marking indicates the
de
SEE MORE:
Emergency Stop Assistant
Concept
If the driver is no longer fit to drive, the system
helps to safely bring the vehicle to a standstill.
General information
The emergency stop function is not triggered
automatically. The emergency stop function can
only be triggered manually by the occupants.
When the system is activated, t
Designation and identification
Designation of electrical machines
The electrical machine designation is used in the technical documentation for
clear identification of
the electrical machine. However, the identification of the electrical machine is
relevant for Service.
Identification of the electrical machine
The electrical ma
