BMW 3: Trunk lid
Trunk lid and doors
Depending on the vehicle equipment and country version, this setting may not be offered.
Via iDrive:
1. "CAR".
2. "Settings".
3. "Key button settings".
4. .png)
Select the symbol.
5. Select the desired setting:
- "Tailgate"
The trunk lid is opened. - "Tailgate and door(s)"
The trunk lid is opened and the doors are unlocked.
Comfort Access
Touchless locking and unlocking
1. "CAR".
2. "Settings".
3. "Doors/Access".
4. "Comfort access".
5. Select the desired setting:
- "Unlock when approaching"
- "Lock when walking away"
Establishing idle state after opening the front doors
Via iDrive:
1. "CAR".
2. "Settings".
3. "Doors/Access".
4. "Turn off vehicle after opening door"
Opening the front doors establishes the idle state.
READ NEXT:
General information
When the vehicle is locked, the vehicle alarm
system reacts to the following changes:
Opening a door, the hood or the trunk lid.
Movements in the car's interior.
Changes in the vehicle tilt, for i
Indicator light on the interior
mirror
The indicator light flashes briefly every 2 seconds:
The alarm system is switched on.
Indicator light flashes for approx. 10 seconds,
then it flashes briefly every 2 seconds:
Interior motion se
SEE MORE:
Emergency Stop Assistant
Concept
If the driver is no longer fit to drive, the system
helps to safely bring the vehicle to a standstill.
General information
The emergency stop function is not triggered
automatically. The emergency stop function can
only be triggered manually by the occupants.
When the system is activated, t
Removing the flat high-voltage connector
Bridge for high-voltage interlock loop
Before the high-voltage connector can be
disconnected, the bridge for the high-voltage
interlock loop must first be removed. The bridge
closes the circuit of the high-voltage interlock
loop in a connected state. The SME and EME
control units continuous
© 2019-2025 Copyright www.bmw3g20.com
