BMW 3: Steering and traffic jam assistant
Concept
The system assists the driver in keeping the vehicle within the lane. For this purpose, the system executes supporting steering movements, for instance when driving in a curve.
General information
The system determines the position of the lane markings and the vehicle driving ahead using five radar sensors and a camera.
Depending on the speed, the system orients itself according to the lane markings or vehicles in front.
Sensors on the steering wheel detect whether the steering wheel is being touched.
Safety information
Warning The system cannot serve as a substitute for the driver's personal judgment in assessing the traffic conditions. Based on the limits of the system, it cannot independently react to all traffic situations. There is a risk of accident. Adjust driving style to traffic conditions. Watch traffic closely and actively intervene where appropriate.
READ NEXT:
Overview
Buttons on the steering wheel
Steering and traffic jam
assistant on/
off.
Switch function on.
Radar sensors
The radar sensors are located in the bumpers.
Front center bumper.
Front side bumper.
Re
Displays in the instrument
cluster
Gray steering wheel symbol:
The system is on standby.
Green steering wheel symbol:
The system is activated.
Yellow flashing steering wheel
symbol:
Lane marking driven over.
The steering wheel vibrate
SEE MORE:
Operation
General information
This chapter describes functions that are operated
in a different way to the way they are operated
in the front, or are only available in the rear.
Music hard disk
Saving of music via CD/DVD is only possible
in front.
The export and import of data is only possible
via the US
Introduction
The Electrical Machine Electronics (EME) is primarily used as control
electronics for the electrical
machine. It is also responsible for converting the direct current voltage from
the high-voltage battery
unit (up to approximately 354.2 V DC) into a three-phase AC voltage for
electrical machine m
