BMW 3: Speed warning
Concept
A speed limit can be set that when reached will cause a warning to be issued.
General information
The warning is repeated if the vehicle speed exceeds the set speed limit again, after it has dropped below it by 3 mph/5 km/h.
Adjusting
Via iDrive:
1. "CAR".
2. "Settings".
3. "General settings".
4. "Speed warning".
5. "Warning at:".
6. Turn the Controller until the desired speed is displayed.
7. Press the Controller.
Activating/deactivating
Via iDrive:
1. "CAR".
2. "Settings".
3. "General settings".
4. "Speed warning".
5. "Speed warning".
Setting your current speed as the speed warning
Via iDrive:
1. "CAR".
2. "Settings".
3. "General settings".
4. "Speed warning".
5. "Select current speed".
Driver Attention Camera
Concept
A camera that monitors driver activity is located in the instrument cluster. The camera evaluates the head position and eye opening and uses the data to analyze the attention of the driver. This system supports various vehicle assistance systems, e.g.:
- Fatigue alert.
- Steering and traffic jam assistant with Assisted Driving Plus.
Activating/deactivating
Via iDrive:
1. "CAR".
2. "Settings".
3. "General settings".
4. "Driver Attention Camera".
5. Select the desired setting.
System limits
The Driver Attention Camera may not be fully functional in the following situations:
- When the Driver Attention Camera is covered by the steering wheel rim.
- When the driver is wearing infrared impermeable sunglasses.
READ NEXT:
Activating/deactivating
popup windows
For some functions, popup windows are displayed
automatically on the Control Display.
Some of these popup windows can be activated
or deactivated.
Via iDrive:
1. "CAR".
2. "Settings".
3. "General
Data protection
Data transfer
Concept
The vehicle offers different services, whose use
requires a data transfer to BMW or a service provider.
The data transfer can be deactivated for
some services.
General informati
SEE MORE:
Time
Setting the time zone
Via iDrive:
1. "CAR".
2. "Settings".
3. "General settings".
4. "Date and time".
5. "Time zone:".
6. Select the desired setting.
The setting is stored for the driver profile currently
used.
Setting the time
Via iDrive:
1. "CAR".
2. "Settings".
3. "General settings".
4.
Coasting
Concept
Under certain conditions the engine is automatically
decoupled from the transmission in the D
selector lever position. The vehicle continues
traveling with the engine idling to reduce consumption.
Selector lever position D remains engaged.
This driving condition is referred to as coasting.
