BMW 3: Overview
Button in the vehicle
.png)
.png)
Intelligent Safety
Camera
.png)
The camera is installed near the interior mirror.
Keep the windshield in front of the interior mirror clean and clear.
With radar sensor
.png)
The radar sensor is located in the lower area of the front bumper.
Always keep radar sensor clean and unobstructed.
Switching on/off
Switching on automatically
The system is automatically active after every driving off.
Switching on/off manually
.png)
Press the button.
The menu for the Intelligent Safety system is displayed.
If all Intelligent Safety systems were switched off, all systems are now switched on.
"Configure INDIVIDUAL": depending on the equipment version, the Intelligent Safety systems can be individually configured. The individual settings are activated and stored for the driver profile currently used. As soon as a setting is changed on the menu, all settings of the menu are activated.
Press the button repeatedly.
The following settings are switched between: "ALL ON": all Intelligent Safety systems are switched on. Basic settings are activated for the subfunctions.
"INDIVIDUAL": the Intelligent Safety systems are switched on according to the individual settings.
Some Intelligent Safety systems cannot be individually switched off.
.png)
Press and hold this button.
All Intelligent Safety systems are switched off.
READ NEXT:
Warning with braking function
Display
If a collision with a pedestrian or a cyclist is imminent,
a warning symbol appears on the instrument
cluster and in the Head-up Display.
The red symbol is displayed and a
signal
sounds.
Alt
Concept, General information, Safety information
Concept
The lane departure warning alerts when the vehicle
is about to run off the road or exit the lane.
General information
This camera-based system warns starting at a
minimum speed.
The minimum s
SEE MORE:
Driving comfort
Adaptive M chassis
Concept
The Adaptive M chassis is a controllable sport
chassis/suspension. This system reduces undesirable
vehicle motion when using a dynamic
driving style or traveling on uneven road surfaces.
This enhances the driving dynamics and driving
comfort depending on the road surface
Direct rail
Injector mounting
Mounting bolts
Plastic sleeve (not required to be reinstalled after taken apart for
service)
Holding clamp with bayonet fitting
Rail
Solenoid valve injector
Casting lug
The solenoid valve injectors are fastened to the holding clamp with a bayonet
fitting. There is a pla
