BMW 3: Driving
- Start/Stop button
- Auto Start/Stop function
- Driving Dynamics Control
- Parking brake
- Turn signal
- Wiper system
- Steptronic transmission
READ NEXT:
Start/Stop button
Concept
Pressing the Start/Stop button
switches drive-ready state on or
off.
Steptronic transmission: the
drive-ready state is switched on
when you depress the brake pedal while pressing
the Start/St
Auto Start/Stop function
Concept
The Auto Start/Stop function helps save fuel.
The system switches off the engine during a
stop, for instance in traffic congestion or at traffic
lights. Drive-ready state remains switched on.
Driving Dynamics Control
Concept
The Driving Dynamics Control influences the
driving dynamics properties of the vehicle.
The vehicle can be adjusted depending on the
situation using various driving modes.
General information
SEE MORE:
Introduction
The function of the brake system of the G20 PHEV is to decelerate the vehicle
safely under stable
conditions. Vehicle deceleration is made up of the following elements:
Conventional hydraulic braking
Regenerative braking
Thanks to regenerative braking it is possible to convert the kinetic
Manual Speed Limiter
Concept
The system can be used to set a speed limit, for
instance to prevent the vehicle from exceeding
speed limits.
General information
The system can limit the speed, starting at a
value of 20 mph/30 km/h. The vehicle can be
driven at any speed below the set speed limit.
Overview
Buttons on the s
© 2019-2026 Copyright www.bmw3g20.com
