BMW 3: Concept, General information, Safety information
Concept
Using this system, a desired speed and a distance to a vehicle ahead can be adjusted using the buttons on the steering wheel.
The system maintains the desired speed on clear roads. For this purpose, the vehicle accelerates or brakes automatically.
If a vehicle is driving ahead of you, the system adjusts the speed of your vehicle so that the set distance to the vehicle ahead is maintained. The speed is adjusted as far as the given situation allows.
General information
A radar sensor is located in the front bumper and a camera on the interior mirror to detect vehicles driving ahead of you.
Depending on the vehicle setting, the cruise control settings may change under certain conditions.
For instance, acceleration can change depending on the driving mode.
The distance can be adjusted in several steps.
For safety reasons, it depends on the respective speed.
If the vehicle ahead of you brakes to a halt, and then proceeds to drive again within a brief period, the system is able to detect this within the given system limits.
Safety information
Warning The system cannot serve as a substitute for the driver's personal judgment in assessing the traffic conditions. Based on the limits of the system, it cannot independently react to all traffic situations. There is a risk of accident. Adjust driving style to traffic conditions. Watch traffic closely and actively intervene where appropriate.
Warning An unsecured vehicle can begin to move and possibly roll away. There is a risk of accident.
Before exiting, secure the vehicle against rolling.
In order to ensure that the vehicle is secured against rolling away, follow the following:
- Set the parking brake.
- On uphill grades or on a downhill slope, turn the front wheels in the direction of the curb.
- On uphill grades or on a downhill slope, also secure the vehicle, for instance with a wheel chock.
Warning The desired speed can be incorrectly adjusted or called up by mistake. There is a risk of accident.
Adjust the desired speed to the traffic conditions. Watch traffic closely and actively intervene where appropriate.
Warning Risk of accident due to too high speed differences to other vehicles, for instance in the following situations:
- When fast approaching a slowly moving vehicle.
- Vehicle suddenly swerving into own lane.
- When fast approaching standing vehicles.
There is a risk of injuries or danger to life.
Watch traffic closely and actively intervene where appropriate.
READ NEXT:
Overview
Buttons on the steering wheel
With steering and traffic jam
assistant:
Cruise control on/off.
With steering and traffic jam
assistant:
Select function.
Without steering and traffic jam
assistant
Switching on/off and interrupting
cruise control
With steering and traffic jam
assistant: Assisted Driving
General information
This button is used to switch the
configured
function on and off.
The button can be used to set the
primarily
used funct
Setting the speed
Maintaining and storing the speed
Press the rocker switch up or down once while
the system is interrupted. The system will be activated.
The current speed is maintained and stored as
desired speed.
SEE MORE:
Buckling the safety belt
1. Guide the safety belt slowly over shoulder
and hip to put it on.
2. Insert the tongue plate into the safety belt
buckle. The safety belt buckle must engage
audibly.
When the safety belt is fastened, the driver's and
passenger's belt straps are automatically tightened
once after driving away.
Un
DC/DC converter
The DC/DC converter in the Electrical Machine Electronics of the G20 PHEV is
able to adopt the
following operating modes:
Standby (also in the event of a component fault or short circuit, power
electronics off)
Buck mode (energy flow to the low-voltage side, converter adjusts
voltage on
