BMW 3: Comfort Access
Concept
The vehicle can be accessed without operating the vehicle key.
Carrying the vehicle key with you, e.g., in your pants pocket, is sufficient.
The vehicle automatically detects the vehicle key when it is in close proximity or in the car's interior.
Unlocking the vehicle
Grasp the handle of a vehicle door completely.
Locking the vehicle
Touch the grooved surface on the handle of a closed vehicle door with your finger for approx. 1 second without grasping the door handle.
Opening and closing the trunk lid with no-touch activation
Concept
The trunk lid can be opened and closed with no-touch activation using the vehicle key you are carrying.
Performing the foot movement
1. Stand in the middle behind the vehicle at approx. one arm's length away from the rear of the vehicle.
2. Wave a foot under the vehicle in the direction of travel and immediately pull it back. With this movement, the leg must pass through the ranges of both sensors.
Trunk lid
Opening
- Unlock the vehicle and then press the button on the outside of the trunk lid.
Press and hold the button on
the vehicle
key for approx. 1 second.Depending on the setting, the doors may also be unlocked.
Without automatic tailgate operation: closing
Close the trunk lid manually.
With automatic tailgate operation: closing
Press the button on the inside
of the
trunk lid.
READ NEXT:
Displays and control
elements
In the vicinity of the steering
wheel
Light switch element
Turn signal indicator, high beams
Instrument cluster
Wipers
Indicator/warning lights
Instrument cluster
The indicator/warning lights c
Seats, mirrors, and steering
wheel
Manually adjustable seats
Forward/backward
Thigh support
Seat tilt
Backrest width
Lumbar support
Height
Backrest tilt
Electrically adjustable seats
Backrest width
Forward/backward, heigh
SEE MORE:
Tasks
The Electrical Machine Electronics is made up internally of three
subcomponents:
Bidirectional DC/AC converter
Unidirectional DC/DC converter
EME control unit
The Electrical Machine Electronics performs the following functions using the
subcomponents
mentioned:
Torque restriction of the dri
Changing/canceling the
recognition function
If another vehicle key or another digital key is to
be assigned to a driver profile, the current assignment
must be canceled first.
Via iDrive:
1. "CAR".
2. "Driver profiles".
3. Move the Controller to the right.
As an alternative for Steps 1 to 3, the profile
image can be tapped in the top stat
