BMW 3 Owners & Service Manuals

BMW 3: Parking lights, low beams and roadside parking lights

BMW 3 Series G20 (2018-2024) Owners Manual / Lights / Parking lights, low beams and roadside parking lights

General information

If the driver's door is opened when the drive-ready state is switched off, the exterior lighting is automatically switched off.

Parking lights

General information

The parking lights can only be switched on in the low speed range.

Switching on

Press the button on the light switch element.

The indicator light in the instrument cluster lights up.

The vehicle is illuminated on all sides.

Do not use the parking lights for extended periods; otherwise, they might drain the battery and it would then be impossible to switch on drive-ready state.

Switching off

Press the button on the light switch element or switch on the drive-ready state.

After the drive-ready state is switched on, the automatic headlight control will be activated.

Low beams

Switching on

Press the button on the light switch element.

The low beams illuminate when drive-ready state is switched on.

The indicator light in the instrument cluster lights up.

Press the button again to switch on the low beams when the standby state is switched on.

Switching off

Depending on the country variant, the low beams can be switched off in the low speed range.

Press the button on the light switch element.

Roadside parking lights

When the vehicle is parked, a one-sided roadside parking light can be switched on.

Right roadside parking light on.

Left roadside parking light off.

Switching off

Switching off the roadside parking light:

Press the button on the light switch element or switch on the drive-ready state.

    READ NEXT:

     Welcome lights

    General information Depending on the equipment, the exterior lighting of the vehicle can be set individually. Activating/deactivating Via iDrive: 1. "CAR". 2. "Settings". 3. "Exterior lighting". 4.

     Adaptive light functions

    Concept Adaptive light functions enable dynamic illumination of the roadway. General information The adaptive light functions may consist of one system or multiple systems, depending on the equipment

     High-beam Assistant

    Concept The high-beam Assistant detects other traffic participants early on and automatically switches the high beams on or off depending on the traffic situation. General information The high-beam As

    SEE MORE:

     New schematic diagram

    The representation of the individual bus systems and their designations have been adapted to the representation and the designation of the ISTA workshop information system. The following table provides an overview of the previous and the current representation and designation: Bus overview G2

     Valet parking mode

    Concept In the valet parking mode, the Control Display is locked and operation via iDrive is no longer possible. E.g., this mode can be used when the vehicle is handed over for valet parking. General information In the valet parking mode, it is not possible to change vehicle settings via iDrive. Per

    © 2019-2024 Copyright www.bmw3g20.com