BMW 3: Laser high beams
Concept
The range of the high beams is increased and ensures an even better illumination of the road.
General information
When the high beams are switched-on, starting with a speed of approx. 37 mph/60 km/h, the laser high beams in the headlight are automatically switched on in addition to the LED high beams.
Depending on the country variant, further information can be obtained from the laser label on the headlight.
Safety information
.png)
The label is in the headlight and is visible from the outside.
Fog lights
Front fog lights
Concept
The front fog lights work alongside the low beams to illuminate a wider area of the roadway.
Functional requirement
The low beams must be switched on before switching on the front fog lights.
Switching on/off
.png)
Press the button.
.png)
The green indicator light in the
instrument
cluster lights up if the front fog
lights are switched on.
If the automatic headlight control is activated, the low beams will come on automatically when you switch on the front fog lights.
When the high beams or headlight flasher are activated, the front fog lights are not switched on.
Instrument lighting
Functional requirement
The parking lights or low beams must be switched on to adjust the brightness.
Adjusting
.png)
Adjust the brightness with the
thumbwheel.
READ NEXT:
Interior lights
General information
Depending on the equipment version, interior
lights, footwell lights, entry lights, ambient lighting,
and speaker lighting are automatically controlled.
Overview
Buttons in the veh
Airbags
Front airbag, driver
Front airbag, front passenger
Head airbag
Side airbag
Knee airbag
Front airbags
Front airbags help protect the driver and the
front passenger by responding to frontal impa
SEE MORE:
Direct rail
Injector mounting
Mounting bolts
Plastic sleeve (not required to be reinstalled after taken apart for
service)
Holding clamp with bayonet fitting
Rail
Solenoid valve injector
Casting lug
The solenoid valve injectors are fastened to the holding clamp with a bayonet
fitting. There is a pla
Training
Qualification to work on the high-voltage system of the G20 PHEV (Hybrid
Generation 4.0) can
be acquired via the respective web-based training if the service employee meets
the following
prerequisites:
Performing work on high-voltage components
Valid "High-voltage Components" certification
