BMW 3 Owners & Service Manuals

BMW 3: Entering a destination via address

General information

Enter at least the country and the town/city for the address. Destination guidance is started to the town/city center if no street is entered.

Selecting the state/province

1. Press the button on the Controller.

2. "Classic input".

3. "State/Province".

4. Select the country from the list.

Entering the address


The address can be entered in any order.

Example: entering the address via the town/city

1. "Classic input".

2. Enter the town/city.

The list is narrowed down further with each entry.

3. Select the symbol.

4. Move the Controller to the right to select the town/city from the list.

5. If necessary, enter the street.

6. Select the street as you would the town/city.

7. If necessary, enter a house number.

8. Select the symbol.

9. Select a house number or range of house numbers from the list.

Starting destination guidance

"Start guidance" or Add intermediate destinations.

Selecting a destination from the contacts

1. Press the button on the Controller.

2. "Contacts".

Contacts are displayed.

3. Select a contact with address.

4. Select the address.


     Received destinations

    General information Depending on the national-market version, the destinations are automatically stored as received destination and can be applied in the destination guidance, if they were transferred

     Planning a trip

    General information When planning a trip, several intermediate destinations can be entered. New trip 1. Press the button on the Controller. 2. Select the type of destination entry. 3. Select a sing

     Stored trips

    General information Up to 30 trips can be stored in the trip list. If necessary, delete existing trips to be able to store new trips. Storing The destination guidance for the tip must be active. 1. P



    Concept The air flow directions can be individually adjusted. Adjusting the ventilation General information The air flow directions can be adjusted for direct or indirect ventilation. Open the vents and position them to ensure effective climate control. Direct ventilation The air flow is directed t

     Flat Tire Monitor FTM

    Concept The system detects tire inflation pressure loss on the basis of rotation speed differences between the individual wheels while driving. In the event of a tire inflation pressure loss, the diameter and therefore the rotational speed of the corresponding wheel changes. The difference will be

    © 2019-2024 Copyright