BMW 3: Concept, General information, Safety information
Concept
Blind spot collision warning detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane. A warning is issued in various gradations in these situations.
General information
.png)
Two radar sensors in the rear bumper monitor the area behind and next to the vehicle when traveling faster than a minimum speed.
The minimum speed is shown in the menu for the intelligent Safety systems.
The system indicates whether there are vehicles in the blind spot, arrow 1, or approaching from behind in the adjacent lane, arrow 2.
The light in the exterior mirror lights up dimmed.
Before you change lanes after setting the turn signal, the system issues a warning in the situations described above.
The light in the exterior mirror flashes and the steering wheel vibrates.
Vehicles with side collision mitigation: at speeds of up to 130 mph/210 km/h, the system can intervene with a brief active steering intervention and help guide the vehicle back into the lane.
The steering intervention occurs when a minimum speed is reached. This minimum speed is displayed on the Control Display in the menu for the steering intervention.
Safety information
Warning The system cannot serve as a substitute for the driver's personal judgment in assessing visibility and traffic situation. There is a risk of accident.
Adjust driving style to traffic conditions. Watch traffic closely and actively intervene where appropriate.
Warning Indicators and warnings cannot serve as a substitute for the driver's personal judgment. Due to its limits, the system may not issue warnings or reactions, or these may be issued late or in a manner that is not consistent with their normal use. There is a risk of accident. Adjust driving style to traffic conditions. Watch traffic closely and actively intervene where appropriate.
READ NEXT:
Overview
Button in the vehicle
Intelligent Safety
Radar sensors
The radar sensors are located in the rear
bumper.
Always keep the bumper in the area of the radar
sensors clean and unobstructed.
Switching on
Warning function
Light in the exterior mirror
Prewarning
The dimmed light in the exterior mirror indicates
when there are vehicles in the blind spot or approaching
from behind.
Acute warning
If the turn signal is swi
SEE MORE:
Split cooling
Split cooling is a new development for the B46TU engine. This cooling concept
is a modified version
of which is already used in the N63TU2.
The Split Cooling function uses the electrical Split Cooling Valve (SCV), to
enable on-demand
decoupling of the crankcase from the coolant flow both in the w
General information
Electronic control devices are installed in the vehicle.
Electronic control units process data they
receive from vehicle sensors, self-generate or
exchange with each other. Some control units
are necessary for the vehicle to function safely or
provide assistance during driving, for instance
driver
