BMW 3: Emergency Request
Intelligent emergency call
Concept
In case of an emergency, an Emergency Request can be triggered automatically by the system or manually.
General information
Only press the SOS button in an emergency.
The Intelligent Assist system establishes a connection with the BMW Response Center.
For technical reasons, the Emergency Request cannot be guaranteed under unfavorable conditions.
Overview
.png)
.png)
SOS button.
Functional requirements
- Standby state is switched on.
- The Assist system is functional.
- If the vehicle is equipped with intelligent emergency call: the SIM card integrated in the vehicle has been activated.
Automatic triggering
Under certain conditions, for instance if the airbags trigger, an Emergency Request is automatically initiated immediately after an accident of corresponding severity. Automatic Collision Notification is not affected by pressing the SOS button.
Manual triggering
1. Tap the cover.
2. Press and hold the SOS button until the LED in the area of the button illuminates green.
- The LED is illuminated green when an Emergency
Request has been initiated.
If a cancel prompt appears on the Control Display, the Emergency Request can be aborted.
If the situation allows, wait in your vehicle until the voice connection has been established.
- The LED flashes green when a connection to
the BMW Response Center has been established.
The BMW Response Center then makes contact with you and takes further steps to help you.
Even if you are unable to respond, the BMW Response Center can take further steps to help you under certain circumstances.
For this, data is transmitted to the BMW Response Center which serves to determine the necessary rescue measures. For instance, the current position of the vehicle, if it can be established.
Even if you can no longer hear the BMW Response Center through the loudspeakers, the BMW Response Center may still be able to hear you.
The BMW Response Center ends the Emergency Request.
READ NEXT:
Jump-starting
General information
If the battery is discharged, the engine can be
started using the battery of another vehicle and
two jumper cables. Only use jumper cables with
fully insulated clamp handles.
Safet
Tow-starting and towing
Safety information
Warning
Due to system limits, individual functions can
malfunction during tow-starting/towing with the
Intelligent Safety systems activated. There is a
risk of accident. Switch all
SEE MORE:
Real Time Traffic
Information RTTI
General information
Depending on the equipment, RTTI is transmitted
via services which can be booked in addition
in some countries.
With RTTI, traffic obstructions are localized more
comprehensively and precisely. Traffic conditions on roads other than the
highways, for instance
secondary roads an
Vehicle tool kit
The onboard vehicle tool kit is located in the left
storage compartment of the cargo area under a
cover.
Wiper blades
Safety information
NOTICE The window may sustain damage if the wiper
falls onto it without the wiper blade installed.
There is a risk of damage to property. Hold the
wiper firmly w
